Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.uisrael.edu.ec/handle/47000/1904
metadata.dc.type: bachelorThesis
Título : IMPLEMENTACIÓN DE UNA PLATAFORMA ROBÓTICA MÓVIL DIFERENCIAL PARA SEGUIMIENTO DE TRAYECTORIA, MEDIANTE UN ALGORITMO DE CONTROL NO LINEAL.
Autor : CORTIJO LEYVA, RENÉ ERNESTO
LARCO CHIRIBOGA, MARTÍN DAVID
Palabras clave : Robot móvil,;seguimiento de trayectoria,;control no lineal,;librerías waijung
Fecha de publicación : 2019
Editorial : Quito
Citación : LARCO CHIRIBOGA, MARTÍN DAVID (2019) IMPLEMENTACIÓN DE UNA PLATAFORMA ROBÓTICA MÓVIL DIFERENCIAL PARA SEGUIMIENTO DE TRAYECTORIA, MEDIANTE UN ALGORITMO DE CONTROL NO LINEAL. Quito UISRAEL, ELECTRÓNICA DIGITAL Y TELECOMUNICACIONES Quito: Universidad Israel 2019, 154p. Mg. RENÉ ERNESTO CORTIJO LEYVA UISRAEL-EC-ELDT-378.242-2019-0023
Resumen : RESUMEN El presente proyecto de titulación se enfoca en la investigación y desarrollo de un algoritmo de seguimiento de trayectoria para el posicionamiento de un robot móvil de un punto X (0) Y (0) a una posición X (d) Y (d) respecto al sistema de referencia tierra, el problema planteado es de control no lineal con restricciones no integrables el cual se reduce de las ecuaciones de Euler-Lagrange a un sistema de control dinámico de posición angular de los motores y un sistema de control cinemático, cuyo algoritmo de control será aplicado a una plataforma robótica móvil de tracción diferencial basada en el microcontrolador STM32F407 de 32 bits, el cual será programado mediante el software Matlab. La realimentación de estados se basa en las ecuaciones de odometría conjuntas de los encoders y el sensor giroscópico acopladas mediante la ecuación cinemática del móvil, que permite obtener la posición y el desplazamiento angular del robot. El diseño del hardware de la plataforma móvil se basa en la integración del microcontrolador STM32F407 el cual será programado mediante USB a través del microcontrolador STM32F103 por medio del software ST-Link, el cual es una ventana del software Matlab gracias a las librerías Waijung, el microcontrolador STM32F407 permite controlar los drivers de los motores, así como el sistema de comunicación serial USART (Trasmisor – receptor asíncrono universal) que transmite los datos al módulo Bluetooth integrado, la comunicación I2C (Circuito Inter-Integrado) que permite recolectar los datos del sensor inercial, los encoders acoplados a los motores, y todos los elementos pasivos que se requieren para el buen funcionamiento del hardware, también se desarrolló y se modeló en 3D la carcasa del móvil, así como la implementación de la PCB (Placa de Circuito Impreso) donde se montarán los elementos DIP y SMD (Montaje superficial). Palabras claves: Robot móvil, seguimiento de trayectoria, control no lineal, librerías waijung
Descripción : The present project of titulación focuses in the investigation and development of a algorithm of pursuit of trajectory for the positioning of a mobile robot of a point X (0) And (0) to a position X (d) And (d) respect to the ground reference system, the proposed problem is a non-linear control with non-integrable constraints which is reduced from the EulerLagrange equations to a system of dynamic control of the angular position of the motors and a kinematic control system, whose algorithm control will be applied to a mobile robotic platform of differential traction based on the 32-bit STM32F407 microcontroller, which will be programmed by the Matlab software. The feedback of states is based on the combined odometry equations of the encoders and the gyro sensor coupled by the kinematic equation of the mobile, which allows to obtain the position and angular displacement of the robot. The hardware design of the mobile platform is based on the integration of the STM32F407 microcontroller which will be programmed via USB through the STM32F103 microcontroller through the ST-Link software, which is a Matlab software window thanks to the Waijung libraries, the STM32F407 microcontroller allows to control the drivers of the motors, as well as the serial communication system USART (Transmitter - universal asynchronous receiver) that transmits the data to the integrated Bluetooth module, the I2C communication (Inter-Integrated Circuit) that allows to collect the sensor data Inertial, the encoders coupled to the motors, and all the passive elements that are required for the proper functioning of the hardware, the housing of the mobile was also developed and modeled in 3D, as well as the implementation of the PCB (Printed Circuit Board) where the DIP and SMD elements will be mounted (Surface mounting). Keywords: Mobile robot, trajectory tracking, non-linear control, waijung libraries
URI : https://repositorio.uisrael.edu.ec/handle/47000/1904
Aparece en las colecciones: Tesis Carrera Electrónica Digital y Telecomunicaciones 2023

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
UISRAEL-EC-ELDT-378.242-2019-023.pdf8,34 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.